GB/T19001-2016 3.8*1000*2000mm Titanium Plates Good Ductility
|Place of Origin||Baoji, Shaanxi, China|
|Certification||GB/T19001-2016 idt ISO9001:2015; GJB9001C-2017|
|Model Number||Titanium plate|
|Minimum Order Quantity||To be negotiated|
|Price||To be negotiated|
|Packaging Details||Wooden case|
|Delivery Time||To be negotiated|
|Supply Ability||To be negotiated|
|Brand Name||Feiteng||Place Of Origin||Baoji, Shaanxi, China|
|Certification||GB/T19001-2016 Idt ISO9001:2015; GJB9001C-2017||Model Number||Titanium Plate|
3.8*1000*2000mm Titanium Plates,
GB T19001 2016 Titanium Plates,
Good Ductility 3.8mm titanium sheet
Titanium Plate Titanium Gr1 3.8*1000*2000 ASTM B265 Titanium Sheet
|Item name||Titanium plate|
|Port of place||Xi'an port, Beijing port, Shanghai port, Guangzhou port, Shenzhen port|
Titanium is a widely used metal, due to its light weight, higher strength than aluminum alloy, can maintain a higher strength than aluminum at high temperature and is highly valued by the aviation industry. Titanium has a wide range of uses in the military industry. Nuclear-powered submarines, hydrofoil boats, anti-tank missiles, missile launchers, bulletproof vests, etc. In the aviation industry, civilian aircraft, strategic rocket engines, spacecraft satellite antennas and other large amounts of titanium. The good mechanical properties of titanium as a structural material are achieved by strictly controlling the appropriate impurity content and adding alloying elements. The smelting process of titanium is generally carried out at a high temperature above 800℃, so it must be operated in a vacuum or under the protection of an inert atmosphere.
Hot forging: Forging of a metal above the recrystallization temperature.
Hot rolling: a process of rolling at temperatures higher than recrystallization.
Cold rolling: rolling process in which the plastic deformation temperature is lower than the recovery temperature.
Annealing: Heat treatment of a metal by slowly heating it to a certain temperature, holding it for a sufficient time, and then cooling it at a suitable rate (usually slow cooling, sometimes controlled cooling).
Pickling: to remove the oxide films on the metal surface by immersing the parts in an aqueous solution such as sulfuric acid. It is pretreatment or intermediate treatment of electroplating, enamel, rolling, and other processes.
Major benefit of titanium parts
1, Low density, good ductility
2, It can be customized according to the drawings required by customers
3, corrosion resistance
4, Heat resistance
5, Low temperature resistance