ISO9001 Gr1 4*220*2440mm ASTM B265 Ti Plate
|Place of Origin||Baoji, Shaanxi, China|
|Certification||GB/T19001-2016 idt ISO9001:2015; GJB9001C-2017|
|Model Number||Titanium plate|
|Minimum Order Quantity||To be negotiated|
|Price||To be negotiated|
|Packaging Details||Wooden case|
|Delivery Time||To be negotiated|
|Supply Ability||To be negotiated|
|Model Number||Titanium Plate||Grade||Titanium Gr2|
|Certification||GB/T19001-2016 Idt ISO9001:2015; GJB9001C-2017||Place Of Origin||Baoji, Shaanxi, China|
ASTM B265 Ti Plate,
Gr1 4*220*2440mm ti plate,
ISO9001 Ti sheet
Titanium Plate Titanium Gr1 4*220*2440 ASTM B265 Titanium Sheet
|Item name||Titanium plate|
|Port of place||Xi'an port, Beijing port, Shanghai port, Guangzhou port, Shenzhen port|
The properties of titanium are closely related to temperature, morphology and purity. Dense titanium is fairly stable in nature, but powder titanium can cause spontaneous combustion in air. The presence of impurities in titanium significantly affects the physical, chemical, mechanical properties and corrosion resistance of titanium. In particular, some interstitial impurities can distort the crystal lattice of titanium and affect various properties of titanium.The presence of impurities in titanium greatly affects its mechanical properties, especially the interstitial impurities (oxygen, nitrogen, carbon) can greatly improve the strength of titanium and significantly reduce its plasticity. The good mechanical properties of titanium as a structural material are achieved by strictly controlling the appropriate impurity content and adding alloying elements.
Titanium plate manufacturing process
Hot forging: Forging of a metal above the recrystallization temperature.
Hot rolling: a process of rolling at temperatures higher than recrystallization.
Cold rolling: rolling process in which the plastic deformation temperature is lower than the recovery temperature.
Annealing: Heat treatment of a metal by slowly heating it to a certain temperature, holding it for a sufficient time, and then cooling it at a suitable rate (usually slow cooling, sometimes controlled cooling).
Pickling: to remove the oxide films on the metal surface by immersing the parts in an aqueous solution such as sulfuric acid. It is pretreatment or intermediate treatment of electroplating, enamel, rolling, and other processes.
Major benefit of titanium parts
1, Low density, good ductility
2, It can be customized according to the drawings required by customers
3, corrosion resistance
4, Heat resistance
5, Low temperature resistance