Gr2 OD46*17mm Sputtering Titanium Targets ASTM B381-06 A

Titanium target Gr2 ASTM B381-06 a OD46*17 Sputtering Target Sputtering Materials Target Sputtering 

Titanium is a very active metal, which is very stable in medium. Titanium has corrosion resistance in oxidizing, neutral and weak reducing medium. Because of the great affinity between titanium and oxygen, a dense, strong adhesion and large inert oxide film is formed on the surface of titanium in air or oxygen-containing medium to protect the titanium matrix from corrosion. Even mechanical wear, it can heal or regenerate quickly. Therefore, titanium is also a metal with strong passivation tendency. In order to improve the corrosion resistance of titanium, surface treatment technologies such as oxidation, electroplating, plasma spraying, ion nitriding, ion implantation and laser treatment were developed to enhance the protective effect of titanium oxide film and obtain the ideal corrosion resistance. In order to meet the needs of metal materials such as sulfuric acid, hydrochloric acid, methylamine solution, high temperature wet chlorine and high temperature chloride production, a series of corrosion resistant titanium alloys such as Ti Mo, Ti palladium, Ti Mo Ni have been developed. Titanium -32 molybdenum alloy is used in titanium castings. Titanium -0.3 molybdenum -0.8 nickel alloy has been applied in the environment where cracks and pitting often occur, or titanium -0.2 palladium alloy has been applied in the local area of titanium equipment. The new titanium alloy can be used for a long time at 600 ℃ or higher. Compared with steel and copper, titanium has the longest vibration decay time after mechanical vibration and electric vibration. Titanium can be used as vibrating element for tuning fork, medical ultrasonic crusher and advanced audio loudspeaker. Titanium is a non-magnetic metal, which will not be magnetized in a large magnetic field. It is nontoxic and has good compatibility with human tissues and blood, so it has been widely used in medicine. This characteristic of titanium shows its high yield strength ratio (tensile strength / yield strength) and poor plastic deformation during forming. Because the ratio of yield limit to elastic modulus of titanium is high, the resilience of titanium is high. Although the thermal conductivity of titanium is lower than that of carbon steel and copper, because of its excellent corrosion resistance, the thickness of titanium can be greatly reduced, and the heat transfer between the surface and the steam is dropwise condensation, thereby reducing the heat group. The thermal resistance of titanium can also be reduced without scaling on the surface, thus significantly improving the heat transfer performance of titanium.

Benefits:

1. Low Density and High Specification Strength
2. Excellent Corrosion Resistance
3. Good Resistance to Effect of Heat
4. Excellent Bearing to Cryogenics Property
5. Nonmagnetic and Non-toxic
6. Good Thermal Properties
7. Low Modulus of Elasticity