High Acid Base Resistance Gr2 Titanium Nuts Industrial Equipment Custom Titanium Parts

Custom Titanium Parts Gr2 ASTM B381-06 a Titanium Car Parts Titanium Precision Parts 

It usually includes the following 12 types of parts:
Bolt: A type of fastener consisting of a head and a screw, used in conjunction with a nut for fastening two parts with through-holes. This type of connection is called bolt connection.
Stud: a type of fastener without a head, having only external threads at both ends. To connect, one end of it must be screwed into a part with an internal threaded hole, the other end through a part with a through hole, and then screw the nut, even though the two parts are fastened together into one piece. This type of connection is called a stud connection and is also a removable connection.
Screw: also by the head and screw two parts of a class of fasteners, according to the use can be divided into three categories: machine screws, set screws and special purpose screws.
Nut: with internal threaded holes, generally in the shape of a flat hexagonal column, but also in the shape of a flat square column or flat cylindrical, with bolts, studs or machine screws, used for fastening two parts, so that it becomes a whole.
Tapping screw: similar to machine screw, but the thread on the screw is used for special tapping screw thread.
Wood screw: similar to machine screws, but the thread on the screw is a special wood screw thread, which can be directly screwed into the wood member, used to fasten a metal part with a through hole and a wood member together.
Washer: a type of fastener shaped like an oblate ring. Between the supporting surface of bolts, screws or nuts and the surface of connecting parts, it can increase the contact surface area of connected parts, reduce the pressure per unit area and protect the surface of connected parts from being damaged
Retaining ring: it is installed in the shaft slot or shaft hole slot of the machine and equipment and plays the role of preventing the parts on the shaft or hole from moving around.
Pin: mainly used for parts positioning, some can also be used for parts connection, fixing parts, transmission of power or locking fasteners.
Rivet: A type of fastener consisting of a head and a stud used to fasten and join two perforated parts into one piece. This type of joint is called rivet joint or riveting for short.
Assembly and connecting pair: assembly is a kind of fastener supplied by combination, such as a machine screw and flat washer combination supply;
Stud: A heterogeneous fastener consisting of a stud rod and a stud head that is welded to a part for further connection to other parts.

Features
1. Low density and high specification strength
2. Excellent corrosion resistance
3. Good heat resistance
4. Excellent low temperature resistance
5. Non-magnetic and non-toxic
6. Good thermal performance
7. Low elastic modulus
8. Good toughness and light weight
9. High acid-base resistance
10. Resistance to high temperature, low temperature, etc