Gr2 35OD*105L Solid Titanium Round Rod Corrosion Resistant

Titanium Bars Gr2 ASTM B348-06 a 35OD*105L Titanium Round Rod Titanium Forging Titanium Products 

Titanium has a metallic luster and ductility. Titanium is characterized by its low density, high mechanical strength and ease of processing. The plasticity of titanium depends largely on its purity. The purer the titanium, the more plastic it is. Good corrosion resistance, not affected by the atmosphere and seawater. At room temperature, it will not be corroded by hydrochloric acid below 7%, sulfuric acid below 5%, nitric acid, aqua regia or dilute alkali solution; Only hydrofluoric acid, concentrated hydrochloric acid, concentrated sulfuric acid can act on it. The presence of impurities in titanium greatly affects its mechanical properties, especially the interstitial impurities (oxygen, nitrogen, carbon) can greatly improve the strength of titanium and significantly reduce its plasticity. The good mechanical properties of titanium as a structural material are achieved by strictly controlling the appropriate impurity content and adding alloying elements.The properties of titanium are closely related to temperature, morphology and purity. Dense titanium is fairly stable in nature, but powder titanium can cause spontaneous combustion in air. The presence of impurities in titanium significantly affects the physical, chemical, mechanical properties and corrosion resistance of titanium.

Titanium bars have good thermal strength, good weldability and excellent corrosion resistance. Its disadvantage is low strength at room temperature. It is usually used as heat-resistant and corrosion resistant material. Titanium alloy is widely used in various fields because of its high specific strength, good corrosion resistance and good heat resistance. The industrial production of titanium began in 1948, and the demand of the aviation industry made the titanium industry develop at an average annual rate of about 8%. At present, the annual output of international titanium alloy processing materials has reached 4 million tons, and there are nearly 30 kinds of titanium alloy trademarks. Titanium alloy is mainly used to manufacture aircraft engine compressor parts, followed by layout parts of rockets, missiles and high-speed aircraft. In the mid-1960s, titanium and its alloys have been used in general industries, such as electrodes for electrolytic industry, condensers for power stations, oil refining and desalination heaters and environmental pollution control equipment. Titanium and its alloys have become an anticorrosion material.

Product advantages
1. Convenient handling.
2. Strong corrosion resistance
3. low fluid resistance
4. High mechanical strength